Medical Equipment Flexible Flat Cable hi medical electronics atana hman tur flat internal connection cable a ni a, copper conductor, PET emaw Polyimide insulation, configurable pitch, conductor count, sei zawng leh PCB, display, sensor leh control module connection atana contact orientation te a awm a ni.
Technical lam thil chi hrang hrang
|
Parameter a ni |
A sawifiahna |
|
Product chi hrang hrang |
Damdawi hmanrua Flexible Flat Cable |
|
Conductor Material a ni |
Copper / Tin-Dawra phuah a ni |
|
Insulation Material a ni |
PET / Polyimide (PI) hmanga siam a ni. |
|
Mual |
0.3 mm / 0.5 mm / 1.0 mm a ni |
|
Cable Sei zawng |
Customized a ni |
|
Conductor / Pin chhiar tur a awm |
Customized a ni |
|
Contact chi hrang hrang |
Same Side / Side lehlam |
|
Operating Temperature a ni |
-40℃atanga +105℃thleng , a duh angin a siam theih |
|
Connector nena inmil theihna |
ZIF / LIF / Thil tih dan phung |
|
Quality zawm a ni |
ISO 9001, RoHS, REACH tih te hi a ni |
Cable siam dan & Connector siam dan tur
Conductor leh Insulation te a ni
Parallel copper emaw tin{0}}plated copper conductor te chu pitch ruat saah dahin PET emaw Polyimide (PI) insulation hmanga laminated an ni.
Pitch & Conductor chhiar dan tur
0.3 mm, 0.5 mm leh 1.0 mm pitch option a awm a, conductor count chu connector interface mamawh angin configure theih a ni.
Contact Configuration a awm bawk
Same-side emaw opposite-side contacts te chu tarlan theih a ni a, contact dimension te chu mating connector leh cable entry direction nena inmil turin configure a ni.
Connector nena inmil theihna
ZIF, LIF leh custom connector interface te hi hmanrua layout nena pitch, conductor count, contact orientation leh cable sei zawng te inremtirin a support theih a ni.
Sample & Drawing-Based Configuration hmanga siam a ni
FFC sample awmsa, technical drawing emaw connector specification emaw chu configuration review atan hman theih a ni. Volume siam hmain fit leh connection verification atan sample siam theih a ni.
EMI / Signal & Environment hrang hranga duhthlan tur
EMI-Sensitive Signal Routing a ni
Electronic circuit dang hnaih taka sensor, display emaw control signal routed nei medical equipment tan chuan signal path leh equipment layout mamawh angin cable configuration chu enfiah theih a ni.
Shielded FFC Option a awm bawk
Cable routing-in electromagnetic interference control dang a mamawhna hmuna hman tur atan shielded construction hi tarlan theih a ni.
Temperature-Dependent Material thlan dan
PET leh Polyimide (PI) insulation hian temperature mamawh hrang hrang nei hmanrua tan material option hrang hrang a pe a ni. Operating range tarlan chu -40℃atanga +105℃thleng a ni.
Halogen-A thlawna siam
Halogen-free material options chu equipment specification atan a awm a, chu chuan halogen-containing materials chu internal cable assembly-ah a khap a ni.
Damdawi hmanrua hman dan tur
Medical Imaging & Monitoring hmanrua te a awm bawk
Ultrasound, imaging system, ECG leh damlo enkawlna hmanrua, internal PCB, display emaw sensor connection mamawhna te.
Laboratory & Diagnostic hmanrua te a awm bawk
Thisen endiktu, biochemical analyzer leh automated diagnostic instrument te hman a ni.
Damdawi lam Display & Control Interface te a awm bawk
Medical LCD display, touch panel leh control interface hmanga display module leh control board inzawmkhawm te a awm a.
Quality Control a ni
Material & Dimensional enfiahna a ni
Copper conductor leh insulation film te chu siam hmain enfiah a ni a, chumi hnuah in-process control in conductor alignment, lamination leh cable dimension te chu construction tarlan nen a inmil lo.
Electric hmanga Test neih a ni
Continuity, conductor resistance leh insulation performance te chu production neih chhungin test a ni a, electrical check tarlan te chu 100% electrical inspection hman a ni.
Final Inspection neih a ni ang
FFC siam zawh tawhte chu an thawn hmain conductor/contact alignment, surface defects leh packaging condition te enfiah thin a ni.
FAQ